ST STM32L100C6U6

ARM® Cortex®-M332 МГц32 КБ (32К x 8)

Overview

The ultra-low-power STM32L100C6U6 and STM32L100R8/RB devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 10 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases. Moreover, the STM32L100C6U6 and STM32L100R8/RB devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB. They also include a real-time clock with sub-second counting and a set of backup registers that remain powered in Standby mode. Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage. The ultra-low-power STM32L100C6U6 and STM32L100R8/RB devices operate from a 1.8 to 3.6 V power supply. They are available in the -40 to +85 °C temperature range. A comprehensive set of power-saving modes allows the design of low-power applications.

Features

• Architecture developed to reach ultra-low consumption in both low-power modes and Run mode; ? Common power supply range from 1.8 V to 3.6 V

• Quick startup from low-power modes

• An adjustable system clock

• Ultra-safe reset: uses the same reset approach as other reset methods, such as brownout reset, power-down reset, and programmable voltage detector.

Applications

• Heat and smoke detectors

• Transmitters for sensors

• Circuit interrupters

• Conditioning of sensor signal

• Industrial communications over wires

• Visual modules

• Battery pack administration

• Toll signs