ON CAT5113VI-01-GT3

Линейный11001kВверх/вниз (U/D, INC, CS)2,5 В ~ 6 В-40°C ~ 85°C

Overview

The CAT5113VI-01-GT3 is a single digital POT designed as an electronic replacement for mechanical potentiometers. Ideal for automated adjustments on high volume production lines, they are also well suited for applications where equipment requiring periodic adjustment is either difficult to access or located in a hazardous or remote environment.The CAT5113VI-01-GT3 contains a 100-tap series resistor array connected between two terminals RH and RL. An up/down counter and decoder that are controlled by three input pins, determines which tap is connected to the wiper, RW. The CAT5113VI-01-GT3 wiper is buffered by an op amp that operates rail to rail. The wiper setting, stored in non-volatile NVRAM memory, is not lost when the device is powered down and is automatically recalled when power is returned. The wiper can be adjusted to test new system values without affecting the stored setting. Wiper-control of the CAT5113VI-01-GT3 is accomplished with three input control pins, CS, U/D, and INC. The INC input increments the wiper in the direction which is determined by the logic state of the U/D input. The CS input is used to select the device and also store the wiper position prior to power down.The digital POT can be used as a three-terminal resistive divider or as a two-terminal variable resistor.

Features

Tape & Reel (TR) Package
Available in 8-SOIC (0.154, 3.90mm Width) package
1 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~85°C
8 pins
Operate supply voltage at the range of 5V

1000 (Max) Resistance - Wiper (Ohms) (Typ)

Applications

There are a lot of ON Semiconductor
CAT5113VI-01-GT3 Digital Potentiometers applications.

• Modern office equipment
• Industrial control
• Medical equipment
• Refrigerator
• Programmable computer
• Power supply
• Power meter
• Automatic detection of equipment
• Optic fiber network
• Adjusting the LCD Display