NXP MKL43Z256VLH4

ARM® Cortex®-M0+48 МГц256 КБ (256К x 8)

Overview

The MKL43Z256VLH4 is a 32-bit Kinetis KL4x Ultra-low-power Microcontroller with USB and segment LCD control, based on ARM Cortex-M0+ RISC architecture core operates at a maximum frequency of 48MHz. The device incorporates 256kB internal flash, 16kB boot ROM, 32kB internal RAM, one 16-bit SAR A/D converter, one 12-bit D/A converter, general purpose PWM and 50 general-purpose I/O pins. This device also features communication interfaces like three UART modules, one I2S module, two SPI modules and two I2C modules.

Features

• 32Byte Backup register

• 48MHz ARM Cortex-M0+ core

• 4-channel Asynchronous DMA controller and Watchdog

• Low-leakage wakeup unit

• 2-pin Serial wire debug (SWD) programming and debug interface

• Micro trace buffer

• Bit manipulation engine

• Interrupt controller

• Internal voltage reference - 1.2V

• 48MHz High accuracy (up to 0.5%) internal reference clock

• 1kHz Reference clock active under all low-power modes (except VLLS0)

• 32 to 40KHz and 3 to 32MHz Crystal oscillator

• Segment LCD supporting up to 28x8 or 32x4 segments

• USB Full-speed 2.0 device controller supporting the crystal-less operation

• One UART module supporting ISO7816, operating up to 1.5Mbit/s

• Two low-power UART modules supporting asynchronous operation in low-power modes

• Two I2C modules and I2C0 supporting up to 1Mbit/s

• Two 16-bit SPI modules supporting up to 24Mbit/s

• One FlexIO module and One serial audio interface I2S

• High-speed analog comparator containing a 6-bit DAC for programmable reference input

Applications

• Industrial

• Automation & Process Control

• Sensor Systems

• Medical systems

• Automobiles

• Home Automation Systems

• Low-cost Embedded Systems

• Defense and Safety Purposes

• Multiple DIY Projects