NXP MC9S08PA4VTG

S0820 МГц4 КБ (4K x 8)

Overview

MC9S08PA4MTG with pin details, that includes S08 Series, they are designed to operate with a Tube Packaging, Package Case is shown on datasheet note for use in a 16-TSSOP (0.173", 4.40mm Width), it has an Operating Temperature range of -40°C ~ 125°C (TA), Supplier Device Package is designed to work in 16-TSSOP, as well as the 14 Number of I O, the device can also be used as 20MHz Speed. In addition, the EEPROM Size is 128 x 8, the device is offered in S08 Core Processor, the device has a 512 x 8 of RAM Size, and Program Memory Type is FLASH, and the Peripherals is LVD, POR, PWM, WDT, and Connectivity is LIN, SPI, UART/USART, and the Voltage Supply Vcc Vdd is 2.7 V ~ 5.5 V, and Core Size is 8-Bit, and the Program Memory Size is 4KB (4K x 8), and Data Converters is A/D 8x12b, and the Oscillator Type is Internal.

MC9S08PA4MTGR with circuit diagram manufactured by NXP / Freescale. is part of the Embedded - Microcontrollers, , and with support for "8-bit Microcontrollers - MCU S08PA 8-bit MCU, * Microcontroller IC, S08PA 8-bit MCU, S08 core, 4KB Flash, SOP 16, 8-bit Microcontrollers - MCU S08PA 8-bit MCU, S08 core, 4KB Flash.

Features

S08 Series
Tube Package
S08 Core Processor
20MHz Speed
LINbus, SPI, UART/USART Connectivity
LVD, POR, PWM, WDT Peripherals
14 Number of I/O
4KB (4K x 8) Program Memory Size
FLASH Program Memory Type
128 x 8 EEPROM Size
512 x 8 RAM Size
2.7V ~ 5.5V Voltage - Supply (Vcc/Vdd)
A/D 8x12b Data Converters
Internal Oscillator Type
Surface Mount Mounting Type

Applications

? 8-Bit S08 central processor unit (CPU)

– Up to 20 MHz bus at 2.7 V to 5.5 V across operating

temperature range

– Supporting up to 40 interrupt/reset sources

– Supporting up to four-level nested interrupt

– On-chip memory

– Up to 4 KB flash read/program/erase over full

operating voltage and temperature

– Up to 128 byte EEPROM; 2-byte erase sector;

program and erase while executing flash

– Up to 512 byte random-access memory (RAM)

– Flash and RAM access protection

? Power-saving modes

– One low-power stop mode; reduced power wait

mode

– Peripheral clock enable register can disable clocks to

unused modules, reducing currents; allows clocks to

remain enabled to specific peripherals in stop3 mode

? Clocks

– Oscillator (XOSC) - loop-controlled Pierce

oscillator; crystal or ceramic resonator range of

31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz

– Internal clock source (ICS) - containing a frequencylocked-loop (FLL) controlled by internal or external

reference; precision trimming of internal reference

allowing 1% deviation across temperature range of 0

°C to 70 °C and 2% deviation across whole

operating temperature range; up to 20 MHz

? System protection

– Watchdog with independent clock source

– Low-voltage detection with reset or interrupt;

selectable trip points

– Illegal opcode detection with reset

– Illegal address detection with reset

 

MC9S08PA4VTG                          Applications

ptional Floating-Point Unit (FPU)