Maxim MAX1449EHJ

10105M1Дифференциальный, односторонний2,7 В ~ 3,6 В2,7 В ~ 3,6 В-40°C ~ 85°C

Overview

The MAX1449EHJ 3.3V, 10-bit analog-to-digital converter (ADC) features a fully differential input, a pipelined 10-stage ADC architecture with wideband track-and-hold (T/H), and digital error correction incorporating a fully differential signal path. The ADC is optimized for lowpower, high-dynamic performance in imaging and digital communications applications. The converter operates from a single 2.7V to 3.6V supply, consuming only 186mW while delivering a 58.5dB (typ) signal-to-noise ratio (SNR) at a 20MHz input frequency. The fully differential input stage has a -3dB 400MHz bandwidth and may be operated with single-ended inputs. In addition to low operating power, the MAX1449EHJ features a 5μA power-down mode for idle periods. An internal 2.048V precision bandgap reference is used to set the ADC's full-scale range. A flexible reference structure allows the user to supply a buffered, direct, or externally derived reference for applications requiring increased accuracy or a different input voltage range.See a parametric table of the complete family of pin-compatible, 10-bit high-speed ADCs. The MAX1449EHJ has parallel, offset binary, CMOS-compatible, three-state outputs that can be operated from 1.7V to 3.6V to allow flexible interfacing. The device is available in a 5mm x 5mm 32-pin TQFP package and is specified over the extended industrial (-40°C to +85°C) temperature range.

Features

Applications

• Rotary encoder
• Displaying
• Transducer
• Microcontrollers.
• Digital Storage Oscilloscope
• Scientific instruments.
• Music reproduction technology
• Communication Systems
• Data Acquisition Systems
• Handheld Terminal Interface